HOWTO:

Restore a file from a DART tape:
	1) ASSIGN MTA0
	2) find DART tape number from catalogs on shelf near LPT
	3) push LOCAL, thread tape, hold brake off, takeup leader,
	   push brake lever left to load, push REMOTE
	4) type RESTORE <file list>
	5) type D MTA0
	6) push LOCAL, REWIND to unload tape

If it's a DAEMON tape, R DAEMON, if it's an old DAEMON tape, R DAEMON.OLD

Run Ken's KIDS program:
	1) mount the KIDS disk pack on user disk drive. CLOSE drive, switch
	   it ON, set it to READ-ONLY.
	2) go to the audio rack beside III23, push the power button on
	   the left of a lower panel ON, put MAIN TAPE INPUT SELECTOR
	   on COMPUTER.
	   Put all white switches in upper right down except for leftmost
	   one in top right group. (not necessary ?)
	3) go into music room, flip power switch on gray panel on cabinet
	   side, make sure rotary switch hidden behind gray panel is
	   fully CCW, put top 2 dials (audio) of gray panel at about
	   11 o'clock, adjust top left dial on Quad control panel for
	   sound level.
	3) Put DOLBY switches on LINE and REC.
	   Push in middle (green & blue) Dolby buttons.
	   Turn on tape recorder power.
	4) put guard panel on keyboard
	5) L 1/KMC
	   DO
	   ANDY
	   (game 1 starts)
	   (to change games, type $<digit>)
	6) shut everything off, replace disk pack

Record using Ravindra's REC.SAI.
	1) Get A/D and III23 and microphone.
	2) Set all A/D switches:

	3) Plug microphone into A/D.
	4) Tell program to record.
	5) Reset two dials on A/D:

	6) Tell program to play and/or save sound.